Most Accessible and Reliable 3D Printed Trainer Plane! Stick is a versatile RC trainer plane built for durability, flexibility, and fun flying. No carbon rod, no fancy materials! Just Regular PLA and ready to dance in the air. �� Included in your kit 3D printed body parts (PLA) – Main airframe components, ready to assemble 3D printed hardware (PETG) – Motor mount, control horns, and other brackets Flex Parts (TPU) – Hinges, straps, wheels, and other necessary flexible parts Pushrods – Steel wire rods for precise control linkage Hardware pack – Screws, rods, wires, and all small essentials for assembly Lipo strap (Velcro belt) – Secure battery mounting solution Craft mat – Protects your table from glue during assembly Nitrile gloves – Keep your hands clean and safe while working with glue Special gifts – Surprise extras included in every kit �� General Specifications Wingspan: 1000 mm Length: 830 mm Printed Weight: 500 g Flying Weight: 850 g Wing Area: 18.44 dm² Wing Loading: 46.1 g/dm² Airfoil: NACA 2412 Minimum 3D Printer Size: 180 mm3 Material: Regular PLA: Body, Wings PetG: Mounts, Brackets, Shafts TPU: Hinges, Wheels Recommended Electronics Motor: 2214 1400Kv ESC: 30A Propeller: 8045 Servos: 4 pcs, 9 g servo Battery: 2S-3S, 850-1850 mAh LiPo (Ideal: 3S 1500 mAh) 3s 18650 Li-ion Radio System: Minimum 4 channels ✈️ Easy to Build and Fly Stick is designed for easy assembly with no experience or advanced equipment. The parts come together cleanly, and the flight characteristics are forgiving enough for new pilots but responsive enough for seasoned flyers. ⚡ Sport Performance Using the Ranger V3 wing profile, Stick combines stability with agility. It’s not an extreme racer, but it gives confident handling and predictable control. Great for both training and enjoying sport flying. ��️ Clean Modular Design Stick features a modular electronics setup that allows neat wiring and easy upgrades. You can swap components without tearing the build apart. �� Close to FPV Stick does not include a dedicated FPV hatch, but it comes with FC and GPS mounts already integrated. With a simple hatch modification, you can easily turn Stick into a basic FPV trainer. This flexibility makes it a great starting point for pilots who want to experience FPV without moving away from the simplicity of a trainer design. �� Float Option Available Stick can be equipped with optional 3D printed floats, allowing smooth takeoffs and landings on water. The floats are designed to replace the landing gear without affecting the balance, so the CG stays correct and flight stability is preserved. With lightweight construction and easy mounting, the float kit turns your Stick into a versatile amphibious trainer that can handle lakes and ponds with ease. Buy floats! Why Choose Stick If you want a no-fuss plane that’s forgiving yet fun, Stick hits the balance. Low loading, stable flight, and fully printable landing gear make it ideal for pilots wanting reliable everyday performance. Buy the Stick Airframe Kit now and see why Craycle built it for pure flying joy.